AM950 VIBRATORY DISC MILL

The Vibratory Disc Mill AM950 is suitable for the extremely quick, loss-free grinding of hard, medium-hard, brittle and fibrous materials to analytical fineness. The largest grinding sets can be 200ML. according to the size of grinding sets, can prepare 1-4 samples at the same time. The mill has proven to be ideal for use in geology, metallurgy and building materials sector and is the perfect mill when it comes to preparing samples for spectral analysis.

Application Examples

geology, metallurgy and building materials sector, environment, agriculture

Product Advantages

1.The motor is connected by shaft, which provides power for the grinding plate, improves the reliability of the mechanism and increases the service life of the motor.

2.To analytical fineness of XRF and spectral analysis with extremely short grinding time

3.Good reproducible results

4.new ergonomic design, ,Easy to install of grinding set

5.There is locations orientation on grinding sets ,which can directly slide into the grinding plate along the track

6.There are difference kinds of size and material for grinding sets

7.LCD display, easy to operate, can be set with positive and negative, intermittent functions. 10 SOPs can be stored

8.Largest grinding chamber is 2000ml, with large sample preparation

9.Can prepare 4×250ml samples at the same time

10.Quick-action grinding set clamping device for convenient and safe tightening

11.Pneumatic lifting device integrated with engine, easy to grab grinding jar

12.Pressure inspection device, the mill can not start without enough pressure; safety interlock

13. Pneumatic lifting device drives by cylinder for safety and long service time

14. No special maintenance is required for the equipment

15.  noise-insulated grinding chamber

Technical Parameter

Feed material	hard, medium-hard, brittle and fibrous materials
Material feed size	＜20mm（Depending on the quality of the material）
Final fineness	＜75um（Depending on the quality and grinding enviroement）
Batch size / feed quantity	35-2000ml
Speed	910/Min.
Operation mode	Forward and reverse, as well as intermission
Setting of grinding time	59min59s
Material of grinding tools	stainless steel, tungsten carbide, agate, zirconium oxide, hardened steel
Size of grinding tools	100ml/250ml/800ml/1000ml2000ml
Drive	3-phase, 380V,50hz
Drive power	2.2KW
Accessories	Pneumatic lifting device, adapter with three holes. Adapter with four holes
W x H x D	1000x1450x800mm
Net weight	About 430Kg